News source：topbath Reads：131 Refresh time：10/29/2009 5:23:42 PM Collects this page
Routine Care
•All Stone Resin products have two types of countertop finishes : matte and gloss. •Soapy water or ammonia-based cleaners will remove most dirt and stains from both types of finishes.
Preventing Heat and Other Damage
•Avoid exposing Stone Resin to strong chemicals,such as paint removers,oven cleaner,etc.If contact occurs,quickly flush the surface with water. •Remove nail polish with a non-acetone-based polish remover and flush with water. •Do not cut directly on Stone Resin countertops
Renewing Stone Resin
While nicks,stains,cuts and scratches can permanently mar most other surfaces,they won’t compromise the appearance of Stone Resin solid surfaces.That’s because it’s easy to restore Stone Resin to its original state,using an ordinary abrasive cleanser and common household degreaser.If damage does occur,Stone Resin can be repaired on site,saving both downtime and aggravation.
Removing Stains and Fixing Scratches or Burns
Like other high-use product,nicks,scratches and cuts are inevitable with Stone Resin.But because Stone Resin is solid all the way through,it is easy to renew to its original appearance as described below. •Identify the extent of the damage and ascertain whether a minor repair will solve the problem,If the damage is minor,try to repair it with an abrasive cleanser or a common household degreaser.
•If the above step is unsuccessful, follow the simple polishing steps below: Glossy Finish: 1. Clean the surface with water,making sure no dust remains. 2. Use 800 sandpaper to polish the surface in focus with water. 3. Use 1500 sandpaper to polish the surface with water to gain a smooth surface. 4. Use 2000 sandpaper to polish the surface with water to gain a smoother surface. 5. Wipe up the water with clean and dry cloth. 6. Polish with G3 wax. 7. Wipe up the remaining wax with a clean and dry cloth.
Matte Finish: 1.Clean the surface with water, making sure no dust remains. 2.Use 800 sandpaper to polish the surface in focus with water to gain a smooth surface and matte finish. 3.Wipe up the water with clean and dry cloth.
